01
Paver Sealing
Two or three coats of a breathable, water-based sealer in the finish you pick: natural, satin or wet-look. For driveways, pool decks, patios and walkways.
Martin County & the Treasure Coast
Paver Sealing in Stuart, FL
We clean, re-sand and seal driveways, pool decks and patios so the color comes back, the joints lock up and the weeds and mildew stay out. Most Stuart jobs run $1.50 to $2.75 a square foot.
- Free on-site estimate, priced by the square foot
- Woman-owned and family-run, with a limited warranty on sealing
- Natural, satin or wet-look finish, your call
- Sealers chosen for Florida sun, rain and salt air
What sealing actually does
Before and after. Tap to see the difference.
Florida sun bleaches the pigment out of unsealed pavers and summer rain washes the sand out of the joints. A proper seal deepens the color, hardens the joints and gives stains nothing to soak into.
Before: grime and sun have turned the pavers gray, and the joints are open to weeds.
Services
Paver sealing services in Stuart
Every job is cleaned and prepped before a drop of sealer goes down. Most of the result is in the prep.
02
Paver Cleaning
Surface cleaning that lifts mildew, algae, rust, tire marks and irrigation stains without blowing out the joints.
03
Joint Re-Sanding
Fresh sand swept into every joint and locked in by the sealer, so pavers stop shifting and weeds and ants lose their way in.
04
Sealer Stripping & Resealing
Old sealer turned white, cloudy or flaky? We strip the failed coating back to bare paver and reseal it properly.
05
Travertine & Stone Sealing
Penetrating sealers for travertine, marble and shell stone that protect against stains while keeping grip around the pool.
06
Paver Repair & Leveling
Sunken, lifted or cracked pavers pulled, re-based and reset before sealing, so the finished surface sits flat.
Where we seal
Our process
Four steps, usually done in a day or two
- 1
Measure & quote
We walk the pavers, measure the square footage and give you a written price.
- 2
Deep clean
Mildew, weeds, stains and old joint sand come out. Plants and pool water are protected.
- 3
Re-sand the joints
New sand is swept and settled into every joint to the right height, in a color picked to suit your pavers.
- 4
Seal
Two coats go down, or three where the pavers are worn and thirsty, locking the sand and the color. We tell you exactly when you can walk and drive on it.
Estimated prices
What paver sealing costs in Stuart
Pavers are priced by the square foot, so a quick measure tells you most of the answer. Condition does the rest: how much cleaning the surface needs, how much sand the joints have lost, and whether an old coating has to come off first.
See the full Stuart cost guide- Clean, re-sand & seal$1.50–$2.75 /sq ft
- Two-car driveway (about 600 sq ft)$900–$1,650
- Pool deck (about 1,000 sq ft)$1,600–$2,750
- Strip failed sealer (added)$1.00–$2.25 /sq ft
- Travertine or shell stone$1.25–$2.50 /sq ft
These are estimates, not quotes. Your written price follows a free visit where we measure the area and check the pavers, the joints and any sealer already on them.
Service areas
Sealing pavers across Stuart and Martin County
Based in Stuart and working from the St. Lucie River out to the island. If you’re nearby and not listed, call and ask.
- Stuart
- Palm City
- Sewall's Point
- Jensen Beach
- Port Salerno
- Hobe Sound
- Hutchinson Island
- Rio
- North River Shores
- Ocean Breeze
- Tequesta
- Port St. Lucie
About us
A family-run Stuart crew that puts pavers first
Stuart Paver Sealing is a Martin County paver cleaning and sealing company. Bringing tired pavers back and sealing them properly is the main part of what we do, not an extra tacked onto a house wash.
We’re a woman-owned, family-run business, so the people who quote your job are the people responsible for it. Every sealing job is backed by a limited warranty, and the sealer is a water-based product sold only to professionals, not the kind you’d pick up at a home center.
That focus matters here. Salt air, daily summer storms and hard UV are tough on sealers, and the wrong product or a rushed job turns white within months. We match the sealer to your pavers and the weather window, and we tell you plainly when a surface isn’t ready to be sealed.
More about how we workPaver sealing questions
How often should pavers be sealed in Florida?
Most paver surfaces here do best resealed every two to three years. Full-sun driveways and pool decks tend to need it sooner than shaded patios.
How much does paver sealing cost in Stuart?
Pricing is by the square foot, usually $1.50 to $2.75 for a full clean, re-sand and seal, and depends on the condition of the pavers, how much sand they need, and whether old sealer has to come off. The estimate is free and written, and the cost guide breaks the numbers down.
How long before I can walk or drive on it?
As a rule of thumb, foot traffic after about a day and vehicles after two to three days. We give you exact times for the product we use on your job.
Will sealing make my pool deck slippery?
It doesn’t have to. Around pools we use a lower-sheen sealer and can add a non-slip additive so the surface keeps its grip when wet.
My old sealer turned white. Can you fix it?
Usually, yes. Whitening is trapped moisture or too much sealer. We strip the failed coating, let the pavers dry out fully and reseal.
My pavers were just installed. When can they be sealed?
Give new pavers a couple of months first. Fresh concrete pavers push a white salt haze (efflorescence) to the surface as they cure, and sealing over it locks the haze in. We check for it at the estimate and clean it off before any coat goes down.